Base size

25*25mm/35*35mm/40*40mm/45*45mm/50*50mm all are standard

Pin diameter

1.70mm for 25mm*25mm base

Pin length

Form 20mm to 150mm are standard

Other length available by special order

Pin meterial

1.70mm pin is alumium

2.67mm & 3.00mm pin are low carbon steel

Also available by special order in all stainless steel or all alumium

Pin plating

Galvanized costing is standard . yellow white and blue gal. Are available

Washers

Self-locking washers are available of sizes , shapes and materials.

To order or specify,please give

Item no./pin dia ./pin length /material

Recommeded assembly method

1.operation at ambient temperature between 15 and 25°c.

2. work surface should be clean and dry,free of dust,grease ,oil and any other loose matter.

3. remove the protective release paper taking care not to touch the adhesive.

4. place the hanger in the required position and press the base against the surface to be insulated

5. insulation can be impaled immediately and firmly locked with fasterning clips but maximum strength of adhereance si achieved after 24 hours.